Translations:Injector/2/en: Difference between revisions

Revision as of 15:36, 28 February 2025

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Injector)

Stored water is cold. As it is injected into the boiler, it may drop temperature of the water already there, causing steam to condense back into water. This can result in significant pressure drop, so water injection is recommended to be done at small amounts and {{pll|Driving Efficiency|well timed}}.

As cold water is being added from a tender, it will affect the temperature of the water already in the boiler. Hence, it is recommended to add water slowly and continuously, proportional to the consumption and needs, to not disrupt steam creation too much. There is no way to monitor water temperature, other than indirectly by looking at the speed the pressure gauge needle is moving.