Translations:Braking Overview/11/en: Difference between revisions

Revision as of 19:14, 17 March 2025

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Braking Overview)

Depending on the session {{pll|Difficulty|difficulty settings}}, a flashing warning light above the {{pll|Monitoring|brake pipe gauge}} indicates certain problems with the braking system. They are:
* There is a {{pll|Handbrake|handbrake}} applied somewhere on the train.
* One of the {{pll|Air Brake System Overview|brake pipe valves}} is incorrectly setup somewhere on the train.
* There are more than one {{pll|Brake Cutout|brake control devices cut in}}, or none is, on the train.

Depending on the session difficulty settings , a flashing warning light above the brake pipe gauge indicates some problems with the braking system. It may mean:

There is a handbrake applied somewhere on the train.
One of the brake pipe valves is incorrectly setup somewhere on the train.
There are more than one brake control devices cut in , or none is, on the train.