Translations:Cylinder Leaks/2/it: Difference between revisions

Revision as of 16:42, 28 February 2025

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Cylinder Leaks)

That said, there are ways to keep running trains safely stationary without handbrakes too, even though this is not recommended. If a train with an applied {{pll|Train Brake|train brake}} contains a motorized vehicle with a {{pll|Lapping|self-lapping}} control valve and a functioning {{pll|Compressor|compressor}}, as long as the engine is running the pressure in all of the train’s brake cylinders will be maintained. This means runaways due to leaks won’t be possible. If the train, however, only contains a {{pll|Lapping|non-self-lapping}} vehicle doing the braking, pressure in the cylinders will not be maintained and can lead to a runaway, unless the brake handle is in the {{pll|Lapping|service}} position.

Tuttavia un treno con il freno continuo applicato e almeno un’unità di trazione con un rubinetto autoregolante e un compressore attivo, può rimanere fermo indefinitamente. Il compressore provvederà, tramite il rubinetto autoregolante e la CG, a mantenere carichi i CF anche in caso di perdite.
Al contrario, nel caso in cui il rubinetto non sia autoregolante, si potrebbe perdere lo stesso il controllo del treno, a meno che la leva non venga lasciata su “frenatura”.