Translations:Injector/2/zh-hant: Difference between revisions

Revision as of 16:47, 28 February 2025

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Injector)

Stored water is cold. As it is injected into the boiler, it may drop temperature of the water already there, causing steam to condense back into water. This can result in significant pressure drop, so water injection is recommended to be done at small amounts and {{pll|Driving Efficiency|well timed}}.

自煤水車中注入鍋爐中的水的尚未加熱，它會影響鍋爐中的既有水溫。因此，建議根據所消耗水量緩慢且連續地注入所須水量，以免過度干擾蒸汽的產生。水溫並無法直接監控，只能透過觀察壓力表指針的移動速度間接進行推斷。