Instalación de Dispositivos
Los dispositivos son objetos que pueden ser instalados en vehículos, para mejorar sus funcionalidades y facilidad de uso. Se pueden comprar en las tiendas del valle. Algunos dispositivos se enfocan en los sistemas del vehículo, mientras que otros son estéticos.
La instalación de dispositivos generalmente implica el uso de una serie de objetos, por lo que se recomienda tener contenedores de objetos, cobertizos de herramientas e incluso tiendas al alcance.
Some gadgets require mounts to be installed. The size of the mounts needs to roughly match the size of the gadgets. A mount can be placed on any surface, and needs to be secured either by getting drilled in with an electric hand drill, or by getting taped with a duct tape.
Once the mount is in place and secured, a gadget can be attached to it. Gadgets and mounts can be removed using the hammer. Drilled holes can be repaired too, using the filler gun.
In order to function, some gadgets need to be connected to the vehicle’s electrical supply. This is done using the soldering gun loaded with soldering wire. Bear in mind that soldering wires are expendable, so and each connection costs money.
Some gadgets can be wired together, using the crimping tool. For example, pairing gadgets with controllers, such as buttons and knobs, makes it possible to toggle them on and off, or fine tune their intensity.
To help differentiate certain gadgets, there is a label maker.
Gadgets installed on DVRT vehicles will, upon vehicle’s despawning, return to a tool shed.